High Quality Solar Brass FittingsThreaded and Compression fittings for solar applications
High Quality Brass Threaded and Compression fittings for solar applications
Threaded brass reducing bush

Flat End BSPT Threaded Brass equal or reducing Nipple.

Equal BSPT Threaded Brass Female Tee

Equal Threaded Brass Male Tee
Equal Threaded Brass Female Socket

Male End Cap

Male End Cap, Size 3/4 and 1 1/4 BSPT thread.

Female End Cap

Female End Cap, Size 3/4 BSPT thread

Male 90 degree Elbow 22mm female compression to connector to solar collector and threaded (1/2, 3/4 or 1) to connect to corrugated stainless steel hose.
Female Adapter 22mm female compression to connector to solar collector and threaded (1/2, 3/4 or 1) to connect to corrugated stainless steel hose.

Used to Connect two solar Solar Collectors in series.

3/4 x 3/4 Female Threaded.

Female NPT to Male BSP Brass Connector with Brass nut, HT washer,SS Cir-clip

This Adapter is used to Connect NPT threaded Fittings to BSP Threaded Fittings. Available in 3 sizes, 1/2, 3/4 and 1:

Female NPT to Male BSP Brass Connector with Brass nut, HT washer,SS Cir-clip

This Adapter is used to Connect NPT threaded Fittings to BSP Threaded Fittings. Available in 3 sizes, 1/2, 3/4 and 1:

 

All NPT threaded 1 Brass Nipple

Male Adapter 22mm female compression to connector to solar collector and threaded (1/2, 3/4 or 1) to connect to corrugated stainless steel hose.
White Brass Nipple 1.25 Inches NPT thread on one side and BSPT Thread on the other.

Solar Air Vent Connection Kit: for connection between 22mm Solar Collector Compression inlet  and solar hose terminal).

Air Vent Maximum Temperature of+180℃ resistance and Maximum pressure of 10bar = 150PSI

Automatic Air Vent 1/2'' (AAV)

1/2'' Male Connection Automatic Air Vent. Installed at the highest point of any pipe. It purges Air contained into the fluid.

In Solar Water Heating applications, AAV are installed at the solar collector's inlet and/or outlet for air purging. Air (if present inside solar collector) will decrease significantly the thermal efficiency of any solar collector.

Maximum Operating Temperature = 180⁰C, Maximum Operating Pressure = 10 Bar.

Automatic Air Vent (AAV)

1/2'' BSPT Male Connection Automatic Air Vent. Installed at the highest point of any pipe. It purges Air contained into the fluid.

In Solar Water Heating applications, AAV are installed at the solar collector's inlet and/or outlet for air purging. Air (if present inside solar collector) will decrease significantly the thermal efficiency of any solar collector

Equal Threaded Brass Female / Female Connections.

Used to Connect two solar Solar Collectors in series.

22mm x 22mm Female Compression.

Used to Connect two solar Solar Collectors in series.

3/4 x 3/4 BSPT Female Threaded.

solar hot water pump coupling

Female NPT to Male BSPT Connector, Brass nut, HT washer, SS Cir-clip

Guide to Sustainable Development Strategy that makes sense

Brass BSPT Threaded Female Tee

Introduction & components, Pump Curve & Specifications, Technical Documents, What is a DIY Pumping Station?, Pumping Stations are an assembly of pump

DIY Solar Pumping Station PSAMR3FV120- Single 3 Speed Cast Iron Pump - 20 ft Head - 3/4 Pipe

PEX Radiant Heating Pipe - OXYPEX

Solar Filling Valve for solar water heater

Brass Check Valve and Brass Non-return Valve manufacturer in India

Flexible Stainless Steel Insulated Twin Hose with Sensor cable