7/8 Male Flare Union SAE 45 Degree Fitting, Brass - SAE J512 – All
$ 16.99 · 5 (603) · In stock
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry. 7/8 Male Flare Union Specs: Hex - 1.25" Length - 2.72" Type - SAE Flare Union Angle - 45 Degrees Thread Size - 7/8”-14 Tube Outer Diameter - 5/8" SAE J512 B
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry.
7/8 Male Flare Union Specs:
Hex - 1.25
Length - 2.72
Type - SAE Flare Union
Angle - 45 Degrees
Thread Size - 7/8”-14
Tube Outer Diameter - 5/8
SAE J512
Benefits:
Durable
Chemically resistant
Broad range of operating temperatures
SAE 45 degree flare vs SAE 37 degree flare JIC:
45 Degree and 37 degree fittings SAE fittings do share the same thread form. i.e. 7/8-14. But are not compatible in terms of fitment, unless your fitting is a 45/37 which is specifically designed to seat either 45 or 37 degrees.
7/8 Male Flare Union Cross References:
AMC 04042-14 7/8 SAE Flare
Parker 42F-14 7/8 SAE Flare
MAF 42-14 7/8 SAE Flare
Champion Brass U2-14 7/8 SAE Flare
Tip: if you don't have a gauge to identify a fittings angle. Fold a sticky note or piece of paper from one corner to the opposite corner, now you have a 45 degree gauge. Stand your fitting on end. if the paper is flush on both the fitting and the surface its sitting on, then your fitting is 45 degrees.
Parker Male Elbow 45 deg., Brass, Flare, PK10 159F-10-6
For 5/8 in x 5/8 in Tube OD, Union Elbow, 90 Degrees
Union Elbow, 90 Degrees: For 5/8 in x 5/8 in Tube OD, Flared x Flared, 1 3/8 in Overall Lg, 10 PK
Festo Mounting Kit, SMBR Series, For Use With SMAT Series, 44% OFF
166FSV-12-12 - Brass 45° Flare Fittings
BRASS,SAE 45 Degree Flared Fittings
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial
7/8 Male Flare Union SAE 45 Degree Fitting, Brass - SAE J512
Brass SAE 45 Flare Fittings, & 37 Flare
/ProductImageThumbs400/17/
Brass SAE 45 Flare Fittings, & 37 Flare
Tacoma Screw Products 5/8 T x 1/2 NPT SAE 45 Flare Brass Fitting - Male Connector (Tube to Male Pipe)
SAE 45° Flare Fitting, Male Elbow, Brass, 5/8 x 1/2, 7/8 -14 Thread
images-na.ssl-images-/images/I/61rXAyNg2