FUEL LINE HOSE CLAMP KITS – Taco Moto Co.

$ 2.99 · 4.9 (510) · In stock

Two types offered: FUEL LINE HOSE CLAMPS These are the same Oetiker OEM clamps used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with electrical side cutters or Oetiker clamp tool. One time use. FUEL LINE HOSE CLAMPS SCREW TYPE These are for us

Two types offered:

FUEL LINE HOSE CLAMPS

These are the same Oetiker OEM clamps used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with electrical side cutters or Oetiker clamp tool. One time use.

FUEL LINE HOSE CLAMPS SCREW TYPE

These are for used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with a flat blade or Philips screwdriver.

  • Stainless steel hose clamps
  • Sold in a pack of 2

 

 


Two types offered: FUEL LINE HOSE CLAMPS These are the same Oetiker OEM clamps used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with electrical side cutters or Oetiker clamp tool. One time use. FUEL LINE HOSE CLAMPS SCREW TYPE These are for used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with a flat blade or Philips screwdriver. Stainless steel hose clamps Sold in a pack of 2    

Fitting an aftermarket tank often means struggling to get the stock hoses routed without kinks or awkward positioning. Solve that headache with the

SIDEWINDER FUEL LINE by TACO MOTO CO.

Coleman RB200 Header with Muffler Real Tree RT200

FUEL TANK VENT HOSE W/ CHECK VALVE by TACO MOTO CO.

21' HUSKY FE501 HARD ENDURO BUILD SECOND TO NONE

CPC fuel line quick-disconnect fittings include Viton® O-rings, pin, latch, stainless springs, and acetal shut-off valve just like the stock connector

ALL METAL FUEL LINE QUICK DISCONNECT COUPLING

Two types offered: IN TANK FUEL FILTER CLAMPS OEM CRIMP TYPE These are the same Oetiker OEM clamps used on the 'accordion' hose on the in-tank fuel

IN-TANK HOSE CLAMP KITS

21 KTM 350 flame out - Moto-Related - Motocross Forums / Message Boards - Vital MX

HOLATO Gas Fuel Line Hose Clamps Fuel Filters with Inline Shut Off Valve Petcock Set for 50cc 70cc 90cc 110cc 125cc 150cc Taotao Coolster Apollo Baja ATV Four Wheeler Moped Scooter Dirt Pit Bike Black : Automotive

Garage Build - January 2023 - Racer X Magazine

THE “PUMP JUMPER” TACO MOTO CO EXCLUSIVEOne of a kind shop and trail tool for transferring gas from one bike to another or performing a pass/fail test

FUEL PUMP TESTER AND TRANSFER KIT by TACO MOTO CO.

FUEL TANK VENT HOSE W/ CHECK VALVE by TACO MOTO CO. – Taco Moto Co.