1/8 inch Quick Connect Male Brass Fitting —

This 1/8 inch quick connect male brass fitting is used on the ends of carpet wands and upholstery tools to connect them with carpet extractors.
This is a male quick connect brass fitting that is usually found on the ends of our carpet wands or upholstery tools. It is important to have a good connection, otherwise you can develop leaks or lose pressure. Replacing this male fitting as well as the female quick connect fitting is all you need to do in order to prevent or repair leakage. Just remember to use plumber's thread tape to seal the threaded connection to the hose, tool, or machine.

This 1/8 inch male quick disconnect is pictured above with its 1/4 inch counterpart. If you need the larger version, please go to the 1/4 inch male quick disconnect product page, and order it there.

For more parts that will fit your wands and upholstery tools, please take a look at our complete line of drag wand jets & parts.

*Please Note: This part previously had a part # of EDI-A00107.

00 PLUG - Welding - Tuffaloy Electrodes

EATON HANSEN, 1/8 in Coupling Size, Hydraulic Quick Connect Hose Coupling

EATON HANSEN Hydraulic Quick Connect Hose Coupling: 1/8 in Coupling Size, Brass, 1/8-27 Thread Size

5/32 Tube O.D. x 1/8 MPT, D.O.T. Air Brake Quick Connect Male

This 1/8 female brass quick disconnect attaches to our 1/8 male quick connect fitting, allowing solution to flow through a contained system. Both

1/8 Brass Female Quick Disconnect

KOOTANS 4pcs 3/8 Hose Barb to 1/8 NPT Male Brass Quick Coupler

PARKER, 1/8 in Coupling Size, Hydraulic Quick Connect Hose Coupling

PARKER Hydraulic Quick Connect Hose Coupling: 1/8 in Coupling Size, Brass, 11.36 lpm Max. Flow Rate

Brass Miniature Quick Connect Body, 0.05 Cv, 1/8 in. Male NPT

0134 69 27 - Quick-Acting Barbed Fitting With Brass Male BSPT

Use these brass 1/4-inch NPT fittings to interface other equipment with the quick disconnect fittings in our Deluxe Hose Kits for booster and

Quick Disconnect = 1/4-inch NPT